Care & Maintenance

Precision Irrigation Systems for the Canary Islands — Designed Around Your Actual Water Budget

Fuerteventura receives under 150mm of rainfall per year — among the lowest in Spain. Yet most irrigation systems installed by generalist operators on the island are set to a European schedule: regular, generous, regardless of season, soil moisture, or what is actually planted in each zone. This is the single biggest cause of garden failure and inflated water bills in the Canary Islands. Plants drown in the wet season and struggle in the dry season because the schedule never changes. The water bill reflects a system designed for a climate that does not exist here. We design and install precision drip and micro-spray irrigation systems around the actual water need of each planting zone, the local rainfall data, and the soil's retention capacity. Every system comes with a written zone-by-zone water budget. Clients typically see a 30–50% reduction in irrigation water use without a measurable decline in plant health.

From €600
  • Zone-by-zone water budget — in writing
  • Calibrated to Fuerteventura rainfall data
  • 30–50% typical water use reduction

What Irrigation Systems Includes

  • Site assessment: soil type and retention capacity, existing water supply pressure and flow rate, planting zones mapped by species and water need
  • Rainfall data analysis: Fuerteventura average monthly rainfall incorporated into the zone scheduling
  • System design: drip emitters, micro-spray heads, or a combination — matched to each zone's requirement
  • Zone-by-zone water budget document: calculated water need per zone per season, in writing
  • Smart controller integration — seasonal scheduling, rain sensor connection
  • Installation: pipe routing, emitter placement, controller wiring, and system commissioning
  • Commissioning check: each zone tested for correct output and coverage, and adjusted before handover
  • Seasonal schedule handover: written seasonal programme showing when and how long each zone runs by month
Overview of Irrigation Systems

Before & After

Before: Irrigation Systems work

Before: An overwatered coastal garden on a European-default schedule — fungal patches on lawn, root rot in succulent beds, monthly water bill of €180. After: Precision drip system installed, zones calibrated to planting type. Water bill at €95 per month, all plants healthy through the following dry season.

Why a Water Budget Changes Everything

Most irrigation installers set a controller and leave. The schedule they program is a default — often copied from a mainland Spanish or Northern European reference — that takes no account of what is planted in each zone, how much water the soil retains, or how the island's rainfall varies month by month.

We approach irrigation design the same way a civil engineer approaches water infrastructure: with a calculation. For each planting zone, we calculate the estimated water need per week by season, subtract the effective rainfall contribution, and size the irrigation output to meet the deficit. The result is a zone-by-zone water budget — a written document you keep — that tells you exactly what your system is designed to deliver and on what schedule.

For homeowners managing their own water budget, it is straightforward: your irrigation is no longer running on a guess, and the water bill reflects actual need rather than someone's default setting. For holiday-let operators, it means that irrigation continues correctly between guest changeovers without someone adjusting a controller manually. For commercial property managers, the water budget is a documented input for cost control and sustainability reporting.

Why our approach to Irrigation Systems works

From Site Assessment to Water Budget

  1. Site Assessment

    We map your planting zones by species and water need, test soil retention capacity, measure water supply pressure and flow, and collect the local rainfall data for your area. This takes a single site visit.

  2. System Design and Water Budget

    We design the system: pipe routes, emitter types, zone layout, and controller specification. We produce the written zone-by-zone water budget showing calculated need per zone per season. We present the design before ordering any materials.

  3. Installation and Commissioning

    We install the system, connect the controller, and commission each zone in turn — testing output, adjusting emitters, and confirming coverage. Smart controller setup and rain sensor connection are included where specified.

  4. Handover and Seasonal Adjustment

    We hand over the system with the water budget document and a seasonal programme showing the schedule month by month. We return at the start of each season (or on request) to adjust the schedule for the coming conditions.

What It Costs

Starting from €600

Irrigation system design and installation starts from €600, depending on the number of zones, the extent of pipe routing, and the controller specification. The zone-by-zone water budget document is included in every installation. Annual maintenance checks and seasonal schedule adjustments are available as a separate agreement. The initial site assessment is free and carries no obligation.

Get a Written Quote — Free Site Assessment Included

Frequently Asked Questions

Get a Free Quote for Irrigation Systems

Fill in the form below and we will contact you within 24 hours to arrange a free on-site assessment. No commitment required.

No spam. We respond within 24 hours. Your data is handled under GDPR and our Privacy Policy.